Showing posts with label Geography. Show all posts
Showing posts with label Geography. Show all posts

Sunday, March 2, 2014

Clouds

 

Clouds are visible accumulations of tiny water droplets or ice crystals in the Earth’s atmosphere.They are  the clumping of condensing water vapor.

Moist air near the Earth’s surface is raised from the ground to high in the atmosphere by the heat of the sun,orographic barrier(Orographic lift) or by a colder invading air mass, called a cold front, that pushes the warm, moist air upward. When the air is lifted, both the air pressure and temperature drops.As soon as the air temperature reaches the air’s dew point, the water vapor in the moist air condenses, and clouds form. Warm air can hold more water vapor than cold air, so lowering the temperature of an air mass is like squeezing a sponge. Clouds are the visible result of that squeeze of cooler, moist air.

Moist air becomes cloudy with only slight cooling.With further cooling, the water or ice particles that make up the cloud can grow into bigger particles that fall to Earth as precipitation.Clouds form when humid air cools enough for water vapor to condense into droplets or ice crystals. The altitude at which this happens depends on the humidity and the rate at which temperature drops with elevation.




Clouds differ greatly in size, shape, and color. They can appear thin and wispy, or bulky and lumpy.

Clouds usually appear white because the tiny water droplets inside them are tightly packed, reflecting most of the sunlight that hits them. White is how our eyes perceive all wavelengths of sunlight mixed together.

When it’s about to rain, clouds darken because the water vapor is clumping together into raindrops, leaving larger spaces between drops of water. Less light is reflected. The rain cloud appears black or gray.
 
Normally, water vapor can only condense onto condensation nuclei—tiny particles that serve as kernels around which drops can form.Condensation nuclei are often nothing but natural dust. But soot particles from automobile exhaust or other types of pollution can also serve the purpose.


Cloud  Types

Clouds are classified according to their height above and appearance (texture) from the ground.

The following cloud roots and translations summarize the components of this classification system:

 1) Cirro-: curl of hair, high.                                     
 2) Alto-: mid.                                                                       
 3) Strato-: layer.
 4) Cumulo-: heap.
 5) Nimbo-: rain, precipitation.

High-level clouds: 

High-level clouds occur above about 20,000 feet (6,000 meters)  and are given the prefix "cirro-". Due to cold tropospheric temperatures at these levels, the clouds primarily are  composed of ice crystals,  and often appear thin, streaky, and white (although a low sun angle, e.g., near sunset, can create an array  of color on the clouds).

The three main types of high clouds are cirrus, cirrostratus, and cirrocumulus.

Cirrus clouds are wispy, feathery, and composed entirely of ice crystals. They often are the first sign of an approaching warm front or upper-level jet streak.

Unlike cirrus, cirrostratus clouds form more of a widespread, veil-like layer (similar to what stratus clouds do in low levels).  When sunlight or moonlight passes through the hexagonal-shaped ice crystals of cirrostratus clouds, the light is dispersed or refracted (similar to light passing through a prism) in such a way that a familiar ring or halo may form. As a warm front approaches, cirrus clouds tend to thicken into cirrostratus, which may, in turn, thicken and lower into altostratus, stratus, and even nimbostratus.

Finally, cirrocumulus clouds are layered clouds permeated with small cumuliform lumpiness. They also may line up in streets or rows of clouds across the sky denoting localized areas of ascent (cloud axes) and descent (cloud-free channels).

 Mid-level clouds:

The bases of clouds in the middle level of the troposphere, given the prefix "alto-", appear between 6,500 and 20,000 feet (2,000 - 6,000 meters ). Depending on the altitude, time of year, and vertical temperature structure of the troposphere, these clouds may be composed of liquid water droplets, ice crystals, or a combination of the two, including supercooled droplets (i.e., liquid droplets whose temperatures are below freezing). 

The two main type of mid-level clouds are altostratus and altocumulus.

Altostratus clouds are "strato" type clouds that possess a flat and uniform type texture in the mid levels. They frequently indicate the approach of a warm front and may thicken and lower into stratus, then nimbostratus resulting in rain or snow. However, altostratus clouds themselves do not produce significant precipitation at the surface, although sprinkles or occasionally light showers may occur from a thick alto-stratus deck. 

Altocumulus clouds exhibit "cumulo" type characteristics in mid levels, i.e., heap-like clouds with convective elements.  Like cirrocumulus, altocumulus may align in rows or streets of clouds, with cloud axes indicating localized areas of ascending, moist air, and clear zones between rows suggesting locally descending, drier air. Altocumulus clouds with some vertical extent may denote the presence of elevated instability, especially in the morning, which could become boundary-layer based and be released into deep convection during the afternoon or evening. 

Low-level clouds:

Low-level clouds are not given a prefix, although their names are derived from "strato-" or "cumulo-", depending on their characteristics. Low clouds occur below 6500 feet (2000 mts), and normally consist of liquid water droplets or even supercooled droplets, except during cold winter storms when ice crystals (and snow) comprise much of the clouds.

The two main types of low clouds include stratus, which develop horizontally, and cumulus, which develop vertically.

Stratus clouds are uniform and flat, producing a gray layer of cloud cover which may be precipitation-free or may cause periods of light precipitation or drizzle.  Low stratus decks are common in winter in the Ohio Valley, especially behind a storm system when cold, dismal, gray weather can linger for several hours or even a day or two.

Stratocumulus clouds are hybrids of layered stratus and cellular cumulus, i.e., individual cloud elements, characteristic of cumulo type clouds, clumped together in a continuous distribution, characteristic of strato type clouds. Stratocumulus also can be thought of as a layer of cloud clumps with thick and thin areas. These clouds appear frequently in the atmosphere, either ahead of or behind a frontal system.

Nimbostratus clouds are generally thick, dense stratus or stratocumulus clouds producing steady rain or snow . 

In contrast to layered, horizontal stratus, cumulus clouds are more cellular (individual) in nature, have flat bottoms and rounded tops, and grow vertically. In fact, their name depends on the degree of vertical development. For instance, scattered cumulus clouds showing little vertical growth on an otherwise sunny day used to be termed "cumulus humilis" or "fair weather cumulus," although normally they simply are referred to just as cumulus or flat cumulus.

A cumulus cloud that exhibits significant vertical development (but is not yet a thunderstorm) is called cumulus congestus or towering cumulus. If enough atmospheric instability, moisture, and lift are present, then strong updrafts can develop in the cumulus cloud leading to a mature, deep cumulonimbus cloud, i.e., a thunderstorm producing heavy rain. In addition, cloud electrification occurs within cumulonimbus clouds due to many collisions between charged water droplet, graupel (ice-water mix), and ice crystal particles, resulting in lightning and thunder.  

 



click to enlarge
 Other Clouds :

Mammatus: Drooping underside (pouch-like appearance) of a cumulonimbus cloud in its latter stage of development. Mammatus most often are seen hanging from the anvil of a severe thunderstorm, but do not produce severe weather. They can accompany non-severe storms as well. 

Contrail: Narrow, elongated cloud formed as jet aircraft exhaust condenses in cold air at high altitudes, indicative of upper level humidity and wind drift.

Fog: Layer of stratus clouds on or near the ground. Different types include radiation fog (forms overnight and burns off in the morning) and advection fog.

Wall Cloud:  A localized lowering from the rain-free base of a strong thunderstorm. The lowering denotes a storm's updraft where rapidly rising air causes lower pressure just below the main updraft, which enhances condensation and cloud formation just under the primary cloud base. Wall clouds take on many shapes and sizes. Some exhibit strong upward motion and cyclonic rotation, leading to tornado formation, while others do not rotate and essentially are harmless.

Shelf Cloud: A low, horizontal, sometimes wedge-shaped cloud associated with the leading edge of a thunderstorm?s outflow or gust front and potentially strong winds. Although often appearing ominous, shelf clouds normally do not produce tornadoes. 

Hole-Punch Clouds
: Also known as a fallstreak hole, this type of cloud is usually formed when the water temperature in the cloud is below freezing but the water has not frozen.  When sections of the water starts to freeze, the surrounding water vapor will also freeze and begin to descend. This leaves a rounded hole in the cloud.The theory on its creation is that a disruption of the cloud layer stability, which can be caused by a passing jet aircraft, creates a descending motion that can lead to the stimulation of evaporation, producing a hole.

Mackerel sky  is a popular term for a sky covered with extensive cirrocumulus or altocumulus clouds arranged in somewhat regular waves and showing blue sky in the gaps. The pattern resembles the scales on a mackerel fish, thus, the name.

Mackerel sky

Clouds above the troposphere

Clouds are found almost exclusively in the troposphere. The stratosphere is very dry, because vertical transfer is limited by the high stability and because any transfer would have to occur through the tropopause, which is so cold that the saturation vapour pressure is negligibly small. Yet on occasion thin veils of clouds are observed above the tropopause.

Nacreous clouds, also known as mother-of-pearl clouds, are stratospheric; they occur between 15 and 30 km. Large volcanic eruptions emit dust particles in the lower stratosphere. These may combine with ice to produce nacreous clouds. In fact, in the year following Mt Pinatubo eruption in 1991, many nacreous clouds where spotted by airline pilots flying in the twilight. Polar stratospheric clouds occur at about 20 km, where the air is at -80°C during the Antarctic winter. Their presence is a factor in the formation of the Antarctic ozone hole.

Nacreous Clouds
 Noctilucent clouds occur in the upper mesosphere, at about 80 km. Their name derives from the fact that they can be seen from the ground when the Sun is 7-10 degrees below the horizon and only reflects off these very high clouds . It arises from the water vapour released upon oxidation of methane. The recent observed increase of such clouds is related to increased atmospheric concentrations of methane, a greenhouse gas. Noctilucent clouds are most common in the summer in polar regions. At this time the mesospheric lapse rate is close to neutral, and this makes uplift easier. 

Noctilucent Clouds



Clouds and Weather

Certain types of clouds produce precipitation. Clouds also produce the bolt of electricity called lightning and the sound of thunder that accompanies it. Lightning is formed in a cloud when positively charged particles and negatively charged particles are separated, forming an electrical field. When the electrical field is strong enough, it discharges a superheated bolt of lightning to the Earth. Most of what we consider to be single lightning strikes are in fact three or four separate strokes of lightning.

The sound of thunder is actually the sonic shock wave that comes when the air, heated by the lightning bolt, expands very rapidly. Thunder sometimes sounds like it comes in waves because of the time it takes the sound to travel. Because the speed of light is faster than the speed of sound, lightning will always appear before its thunder is heard.

Meteorologists measure cloud cover, or the amount of the visible sky covered by clouds, in units called oktas. An okta estimates how many eighths of the sky (octo-) is covered in clouds. A clear sky is 0 oktas, while a totally overcast or gray sky is 8 oktas.

Scientists have experimented with a process called cloud seeding for many years. Cloud seeding aims to influence weather patterns. Seeds, or microscopic particles, are placed in clouds. These seeds are artificial cloud condensation nuclei (CCN), which are tiny particles of dust, salt, or pollution that collect in all clouds. Every raindrop and snowflake contains a CCN. Water or ice droplets accumulate around CCN. Scientists hope that cloud seeding will allow people to control precipitation.



Saturday, July 20, 2013

Men of Rock


Professor Iain Stewart traces the story of how the landscape of Scotland revealed to the world how the planet works. A band of pioneer geologists in Scotland were the first to work out the true age of the Earth, measure earthquakes, understand supervolcanoes, discover the ice ages and explain how continents move around the surface of the planet. This new three-part series takes us through the latest science about the Earth and shows how these early mavericks and visionaries came up with revolutionary ideas that changed scientific understanding of the world forever.

Deep Time

Iain Stewart follows in the footsteps of the founding father of geology, James Hutton. This Scottish rogue was a profound and original thinker who, 250 years ago, overturned ancient beliefs about how and when the world was formed. His ideas clashed with those of the most eminent scientist of his day. Lord Kelvin was determined to prove Hutton wrong. 



Moving Mountains

Geologist Iain Stewart retraces the steps of a band of maverick pioneers who made ground-breaking discoveries in the landscape of Scotland about how our planet works.Iain finds out how gung-ho geologist Edward Bailey discovered Scotland was once home to super volcanoes. And how unsung hero Arthur Holmes solved the mystery of what makes continents move across the surface of the globe.


The Big Freeze

Geologist Iain Stewart retraces the steps of a band of maverick pioneers who made ground-breaking discoveries in the landscape of Scotland about how our planet works.In the final episode, Iain finds out about daredevil scientist Louis Agassiz, who first imagined the world had been gripped by an ice age. Plus, the story of humble janitor James Croll, who used the planets to work out the natural rhythms of the earth's climate.



Tuesday, May 28, 2013

Indian Wildlife (Documentaries)


Home to over a billion people, India is best known as a diverse mass of noise, crowds, colour and religious devotion. She also has a wild side, populated by giants, predators and exotic creatures. Wild India gives you a fascinating insight into this world-within-a-world, as each show explores the country's extraordinary landscapes and their inhabitants.

Elephant Kingdom




To the south of the Himalayas lie wild plains, divided by the Brahmaputra river and home to the magnificent Indian Elephant. In this episode you'll also see red silk cotton trees and rare and beautiful creatures, from the smooth-coated otter to the endangered one-horned rhinoceros, all living together in a perfectly balanced ecosystem.

Tiger Jungles



The setting for Rudyard Kipling's 'The Jungle Book', these forests are filled with real-life stories - from langur monkeys intoxicated on fermented Mahua fruit to the Bengal tiger, a beautiful killer combining stealth and power to kill with a single bite.


Desert Lions




Marusthali is India's region of death - a dune-covered desert where existence demands resilience and adaptation. Yet even in this unrelenting heat, life thrives, from the Asiatic lion to the Demoiselle crane. Each creature is living proof that wildlife can survive in even the most hostile of environments.


Monday, April 15, 2013

Green Accounting System in India


Green Accounting

Double-digit GDP fixation is threatening India’s biodiversity and its long-term growth and security. Green accounting methods have estimated the loss of ecological wealth in India. GDP measures the value of output produced within a country over a certain time period. However, any depreciation measurements used, will account only for manmade capital and not the negative impact of growth on valuable natural capital, such as water, land, forests, biodiversity and the resulting negative effects on human health and welfare.Over the course of the last fifty years, India has lost over half its forests, 40 per cent of its mangroves and a significant part of its wetlands. At least 40 species of plants and animals have become extinct with several hundred more endangered.

In “green accounting” approach national accounts are adjusted to include the value of nature´s goods and services. Mr Jairam Ramesh, the former environment minister, advocated greening India’s national accounts by 2015 and encouraged policy makers to recognise the trade-off between pursuing high growth economic policies against the extensive impact they could have on India’s natural capital.

The Green Indian States Trust (GIST) which, in 2003 unleashed a series of environmentally adjusted accounts under the Green Accounting for Indian States Project. According to their results, the loss of forest ecological services (i.e.soil erosion prevention, flood control and ground water augmentation) over three years (2001-03) due to declining dense forests was estimated at an astounding 1.1 per cent of GDP.According to GIST´s latest results, the North-Eastern states continue to be most affected, particularly Arunachal Pradesh and Mizoram where the loss of forest ecological services is more than 12 per cent of their NSDP.

India to have green national accounting system

  India expects to put in place in five years a system of green national accounting that would take into account the environmental costs of development and reflect the use of precious depletable natural resources in the process of generating national income.Economists estimate gross domestic product (GDP) as a broad measure of national income, while net domestic product (NDP) accounts for the use of physical capital.As yet, we have no generally accepted system to convert gross domestic product into green domestic product that would reflect the use up of precious depletable natural resources in the process of generating national income.

  Economists all over the world have been at work for quite some time on developing a robust system of green national accounting but "we are not there as yet". "Ideally, if we can report both gross domestic product and green domestic product, we will get a better picture of the trade-offs involved in the process of economic growth.  

World Bank launches ‘green' national accounts initiative



A new global partnership to help developing countries integrate the economics of ecosystems into national accounting systems has been launched by the World Bank.The alarming loss of biological diversity around the world is attributable to the lack of proper valuation of the ecosystems and the services they provide. The valuation and its integration into national accounts are expected to lead to better management of natural environments. According to Mr Robert B. Zoellick, Former President, World Bank Group, the natural wealth of nations should be a capital asset valued in combination with its financial capital, manufactured capital and human capital. The national accounts should reflect the vital carbon storage services that forests provide and the coastal protection values that come from coral reefs and mangroves, he said at a Convention on Biological Diversity held in Nagoya, Japan. 

The first phase of the partnership to ‘green' national accounts has been launched starting with India and Colombia, which will be in a group of six to 10 countries. A forthcoming World Bank Publication, titled ‘The Changing Wealth of Nations', states that the commercial value of farmlands, forests, minerals and energy worldwide is more than $44 trillion, of which, the developing countries account for $29 trillion. But, there is more value in the services provided by ecosystems such as forests, like hydrology regulation, soil retention and pollination.

United Nations Environment Programme



The partnership initiative builds on ‘The Economics of Ecosystems and Biodiversity' (TEEB) project of the United Nations Environment Programme (UNEP). It will include developing and developed countries, non-governmental organisations and the global organisation for legislators.

During the initial five-year pilot period, the programme will focus on how countries can quantify the ecosystems and their services in terms of income and asset values; developing ways to incorporate these values into policies on wealth and economic growth; and evolve guidelines for implementation of the valuations worldwide, according to a World Bank report. The feasibility studies to identify priority ecosystems will start soon in India and Colombia, while many other countries in Africa, Asia, Latin America and Central Europe have evinced interest to become partners in the pilot programme.

India, Brazil lead in building green economies



India and Brazil lead the number of countries who are willing to draw on findings from the three-year study project The Economics of Ecosystems and Biodiversity (TEEB) to make their economies more environment-friendly and effectively use the services of nature.The Brazilian and Indian governments are among those keen to use findings from The Economics of Ecosystems and Biodiversity (Teeb) project. Final results from the three-year study were unveiled here at the UN Convention on Biological Diversity meeting.Nature's services must be counted if they are to be valued, its leader said.  


More Info : 



Tuesday, March 26, 2013

Plate Tectonics


In the early 1960s, the emergence of the theory of plate tectonics started a revolution in the earth sciences. Since then, scientists have verified and refined this theory, and now have a much better understanding of how our planet has been shaped by plate-tectonic processes. We now know that, directly or indirectly, plate tectonics influences nearly all geologic processes, past and present. Indeed, the notion that the entire Earth's surface is continually shifting has profoundly changed the way we view our world.

People benefit from, and are at the mercy of, the forces and consequences of plate tectonics. With little or no warning, an earthquake or volcanic eruption can unleash bursts of energy far more powerful than anything we can generate. While we have no control over plate-tectonic processes, we now have the knowledge to learn from them. The more we know about plate tectonics, the better we can appreciate the grandeur and beauty of the land upon which we live, as well as the occasional violent displays of the Earth's awesome power.

In geologic terms, a plate is a large, rigid slab of solid rock. The word tectonics comes from the Greek root "to build." Putting these two words together, we get the term plate tectonics, which refers to how the Earth's surface is built of plates. The theory of plate tectonics states that the Earth's outermost layer is fragmented into a dozen or more large and small plates that are moving relative to one another as they ride atop hotter, more mobile material. Before the advent of plate tectonics, however, some people already believed that the present-day continents were the fragmented pieces of preexisting larger landmasses ("supercontinents"). The diagrams below show the break-up of the supercontinent Pangaea (meaning "all lands" in Greek), which figured prominently in the theory of continental drift -- the forerunner to the theory of plate tectonics.


According to the continental drift theory, the supercontinent Pangaea began to break up about 225-200 million years ago, eventually fragmenting into the continents as we know them today.

Plate tectonics is a relatively new scientific concept, introduced some 30 years ago, but it has revolutionized our understanding of the dynamic planet upon which we live. The theory has unified the study of the Earth by drawing together many branches of the earth sciences, from paleontology (the study of fossils) to seismology (the study of earthquakes). It has provided explanations to questions that scientists had speculated upon for centuries -- such as why earthquakes and volcanic eruptions occur in very specific areas around the world, and how and why great mountain ranges like the Alps and Himalayas formed.

Why is the Earth so restless? What causes the ground to shake violently, volcanoes to erupt with explosive force, and great mountain ranges to rise to incredible heights?

Scientists, philosophers, and theologians have wrestled with questions such as these for centuries. Until the 1700s, most Europeans thought that a Biblical Flood played a major role in shaping the Earth's surface. This way of thinking was known as "catastrophism," and geology (the study of the Earth) was based on the belief that all earthly changes were sudden and caused by a series of catastrophes. However, by the mid-19th century, catastrophism gave way to "uniformitarianism," a new way of thinking centered around the "Uniformitarian Principle" proposed in 1785 by James Hutton, a Scottish geologist. This principle is commonly stated as follows: The present is the key to the past. Those holding this viewpoint assume that the geologic forces and processes -- gradual as well as catastrophic -- acting on the Earth today are the same as those that have acted in the geologic past.

The belief that continents have not always been fixed in their present positions was suspected long before the 20th century; this notion was first suggested as early as 1596 by the Dutch map maker Abraham Ortelius in his work Thesaurus Geographicus. Ortelius suggested that the Americas were "torn away from Europe and Africa . . . by earthquakes and floods" and went on to say: "The vestiges of the rupture reveal themselves, if someone brings forward a map of the world and considers carefully the coasts of the three [continents]." Ortelius' idea surfaced again in the 19th century. However, it was not until 1912 that the idea of moving continents was seriously considered as a full-blown scientific theory -- called Continental Drift -- introduced in two articles published by a 32-year-old German meteorologist named Alfred Lothar Wegener. He contended that, around 200 million years ago, the supercontinent Pangaea began to split apart. Alexander Du Toit, Professor of Geology at Witwatersrand University and one of Wegener's staunchest supporters, proposed that Pangaea first broke into two large continental landmasses, Laurasia in the northern hemisphere and Gondwanaland in the southern hemisphere. Laurasia and Gondwanaland then continued to break apart into the various smaller continents that exist today.

Wegener's theory was based in part on what appeared to him to be the remarkable fit of the South American and African continents, first noted by Abraham Ortelius three centuries earlier. Wegener was also intrigued by the occurrences of unusual geologic structures and of plant and animal fossils found on the matching coastlines of South America and Africa, which are now widely separated by the Atlantic Ocean. He reasoned that it was physically impossible for most of these organisms to have swum or have been transported across the vast oceans. To him, the presence of identical fossil species along the coastal parts of Africa and South America was the most compelling evidence that the two continents were once joined.

In Wegener's mind, the drifting of continents after the break-up of Pangaea explained not only the matching fossil occurrences but also the evidence of dramatic climate changes on some continents. For example, the discovery of fossils of tropical plants (in the form of coal deposits) in Antarctica led to the conclusion that this frozen land previously must have been situated closer to the equator, in a more temperate climate where lush, swampy vegetation could grow. Other mismatches of geology and climate included distinctive fossil ferns (Glossopteris) discovered in now-polar regions, and the occurrence of glacial deposits in present-day arid Africa, such as the Vaal River valley of South Africa.

The theory of continental drift would become the spark that ignited a new way of viewing the Earth. But at the time Wegener introduced his theory, the scientific community firmly believed the continents and oceans to be permanent features on the Earth's surface. Not surprisingly, his proposal was not well received, even though it seemed to agree with the scientific information available at the time. A fatal weakness in Wegener's theory was that it could not satisfactorily answer the most fundamental question raised by his critics: What kind of forces could be strong enough to move such large masses of solid rock over such great distances? Wegener suggested that the continents simply plowed through the ocean floor, but Harold Jeffreys, a noted English geophysicist, argued correctly that it was physically impossible for a large mass of solid rock to plow through the ocean floor without breaking up.

Undaunted by rejection, Wegener devoted the rest of his life to doggedly pursuing additional evidence to defend his theory. He froze to death in 1930 during an expedition crossing the Greenland ice cap, but the controversy he spawned raged on. However, after his death, new evidence from ocean floor exploration and other studies rekindled interest in Wegener's theory, ultimately leading to the development of the theory of plate tectonics.

Plate tectonics has proven to be as important to the earth sciences as the discovery of the structure of the atom was to physics and chemistry and the theory of evolution was to the life sciences. Even though the theory of plate tectonics is now widely accepted by the scientific community, aspects of the theory are still being debated today. Ironically, one of the chief outstanding questions is the one Wegener failed to resolve: What is the nature of the forces propelling the plates? Scientists also debate how plate tectonics may have operated (if at all) earlier in the Earth's history and whether similar processes operate, or have ever operated, on other planets in our solar system.

Developing the theory

Continental drift was hotly debated off and on for decades following Wegener's death before it was largely dismissed as being eccentric, preposterous, and improbable. However, beginning in the 1950s, a wealth of new evidence emerged to revive the debate about Wegener's provocative ideas and their implications. In particular, four major scientific developments spurred the formulation of the plate-tectonics theory: (1) demonstration of the ruggedness and youth of the ocean floor; (2) confirmation of repeated reversals of the Earth magnetic field in the geologic past; (3) emergence of the seafloor-spreading hypothesis and associated recycling of oceanic crust; and (4) precise documentation that the world's earthquake and volcanic activity is concentrated along oceanic trenches and submarine mountain ranges.

Ocean floor mapping

About two thirds of the Earth's surface lies beneath the oceans. Before the 19th century, the depths of the open ocean were largely a matter of speculation, and most people thought that the ocean floor was relatively flat and featureless. However, as early as the 16th century, a few intrepid navigators, by taking soundings with hand lines, found that the open ocean can differ considerably in depth, showing that the ocean floor was not as flat as generally believed. Oceanic exploration during the next centuries dramatically improved our knowledge of the ocean floor. We now know that most of the geologic processes occurring on land are linked, directly or indirectly, to the dynamics of the ocean floor.

"Modern" measurements of ocean depths greatly increased in the 19th century, when deep-sea line soundings (bathymetric surveys) were routinely made in the Atlantic and Caribbean. In 1855, a bathymetric chart published by U.S. Navy Lieutenant Matthew Maury revealed the first evidence of underwater mountains in the central Atlantic (which he called "Middle Ground"). This was later confirmed by survey ships laying the trans-Atlantic telegraph cable. Our picture of the ocean floor greatly sharpened after World War I (1914-18), when echo-sounding devices -- primitive sonar systems -- began to measure ocean depth by recording the time it took for a sound signal (commonly an electrically generated "ping") from the ship to bounce off the ocean floor and return. Time graphs of the returned signals revealed that the ocean floor was much more rugged than previously thought. Such echo-sounding measurements clearly demonstrated the continuity and roughness of the submarine mountain chain in the central Atlantic (later called the Mid-Atlantic Ridge) suggested by the earlier bathymetric measurements.


In 1947, seismologists on the U.S. research ship Atlantis found that the sediment layer on the floor of the Atlantic was much thinner than originally thought. Scientists had previously believed that the oceans have existed for at least 4 billion years, so therefore the sediment layer should have been very thick. Why then was there so little accumulation of sedimentary rock and debris on the ocean floor? The answer to this question, which came after further exploration, would prove to be vital to advancing the concept of plate tectonics.

In the 1950s, oceanic exploration greatly expanded. Data gathered by oceanographic surveys conducted by many nations led to the discovery that a great mountain range on the ocean floor virtually encircled the Earth. Called the global mid-ocean ridge, this immense submarine mountain chain -- more than 50,000 kilometers (km) long and, in places, more than 800 km across -- zig-zags between the continents, winding its way around the globe like the seam on a baseball. Rising an average of about 4,500 meters(m) above the sea floor, the mid-ocean ridge overshadows all the mountains in the United States except for Mount McKinley (Denali) in Alaska (6,194 m). Though hidden beneath the ocean surface, the global mid-ocean ridge system is the most prominent topographic feature on the surface of our planet.

Magnetic striping and polar reversals

Beginning in the 1950s, scientists, using magnetic instruments (magnetometers) adapted from airborne devices developed during World War II to detect submarines, began recognizing odd magnetic variations across the ocean floor. This finding, though unexpected, was not entirely surprising because it was known that basalt -- the iron-rich, volcanic rock making up the ocean floor-- contains a strongly magnetic mineral (magnetite) and can locally distort compass readings. This distortion was recognized by Icelandic mariners as early as the late 18th century. More important, because the presence of magnetite gives the basalt measurable magnetic properties, these newly discovered magnetic variations provided another means to study the deep ocean floor.

A theoretical model of the formation of magnetic striping. New oceanic crust forming continuously at the crest of the mid-ocean ridge cools and becomes increasingly older as it moves away from the ridge crest with seafloor spreading (see text): a. the spreading ridge about 5 million years ago; b. about 2 to 3 million years ago; and c. present-day. 
Early in the 20th century, paleomagnetists (those who study the Earth's ancient magnetic field) -- such as Bernard Brunhes in France (in 1906) and Motonari Matuyama in Japan (in the 1920s) -- recognized that rocks generally belong to two groups according to their magnetic properties. One group has so-called normal polarity, characterized by the magnetic minerals in the rock having the same polarity as that of the Earth's present magnetic field. This would result in the north end of the rock's "compass needle" pointing toward magnetic north. The other group, however, has reversed polarity, indicated by a polarity alignment opposite to that of the Earth's present magnetic field. In this case, the north end of the rock's compass needle would point south. How could this be? This answer lies in the magnetite in volcanic rock. Grains of magnetite -- behaving like little magnets -- can align themselves with the orientation of the Earth's magnetic field. When magma (molten rock containing minerals and gases) cools to form solid volcanic rock, the alignment of the magnetite grains is "locked in," recording the Earth's magnetic orientation or polarity (normal or reversed) at the time of cooling.

As more and more of the seafloor was mapped during the 1950s, the magnetic variations turned out not to be random or isolated occurrences, but instead revealed recognizable patterns. When these magnetic patterns were mapped over a wide region, the ocean floor showed a zebra-like pattern. Alternating stripes of magnetically different rock were laid out in rows on either side of the mid-ocean ridge: one stripe with normal polarity and the adjoining stripe with reversed polarity. The overall pattern, defined by these alternating bands of normally and reversely polarized rock, became known as magnetic striping.

Seafloor spreading and recycling of oceanic crust


The discovery of magnetic striping naturally prompted more questions: How does the magnetic striping pattern form? And why are the stripes symmetrical around the crests of the mid-ocean ridges? These questions could not be answered without also knowing the significance of these ridges. In 1961, scientists began to theorize that mid-ocean ridges mark structurally weak zones where the ocean floor was being ripped in two lengthwise along the ridge crest. New magma from deep within the Earth rises easily through these weak zones and eventually erupts along the crest of the ridges to create new oceanic crust. This process, later called seafloor spreading, operating over many millions of years has built the 50,000 km-long system of mid-ocean ridges. This hypothesis was supported by several lines of evidence: (1) at or near the crest of the ridge, the rocks are very young, and they become progressively older away from the ridge crest; (2) the youngest rocks at the ridge crest always have present-day (normal) polarity; and (3) stripes of rock parallel to the ridge crest alternated in magnetic polarity (normal-reversed-normal, etc.), suggesting that the Earth's magnetic field has flip-flopped many times. By explaining both the zebralike magnetic striping and the construction of the mid-ocean ridge system, the seafloor spreading hypothesis quickly gained converts and represented another major advance in the development of the plate-tectonics theory. Furthermore, the oceanic crust now came to be appreciated as a natural "tape recording" of the history of the reversals in the Earth's magnetic field.

Additional evidence of seafloor spreading came from an unexpected source: petroleum exploration. In the years following World War II, continental oil reserves were being depleted rapidly and the search for offshore oil was on. To conduct offshore exploration, oil companies built ships equipped with a special drilling rig and the capacity to carry many kilometers of drill pipe. This basic idea later was adapted in constructing a research vessel, named the Glomar Challenger, designed specifically for marine geology studies, including the collection of drill-core samples from the deep ocean floor. In 1968, the vessel embarked on a year-long scientific expedition, criss-crossing the Mid-Atlantic Ridge between South America and Africa and drilling core samples at specific locations. When the ages of the samples were determined by paleontologic and isotopic dating studies, they provided the clinching evidence that proved the seafloor spreading hypothesis.

A profound consequence of seafloor spreading is that new crust was, and is now, being continually created along the oceanic ridges. This idea found great favor with some scientists who claimed that the shifting of the continents can be simply explained by a large increase in size of the Earth since its formation. However, this so-called "expanding Earth" hypothesis was unsatisfactory because its supporters could offer no convincing geologic mechanism to produce such a huge, sudden expansion. Most geologists believe that the Earth has changed little, if at all, in size since its formation 4.6 billion years ago, raising a key question: how can new crust be continuously added along the oceanic ridges without increasing the size of the Earth?

This question particularly intrigued Harry H. Hess, a Princeton University geologist and a Naval Reserve Rear Admiral, and Robert S. Dietz, a scientist with the U.S. Coast and Geodetic Survey who first coined the term seafloor spreading. Dietz and Hess were among the small handful who really understood the broad implications of sea floor spreading. If the Earth's crust was expanding along the oceanic ridges, Hess reasoned, it must be shrinking elsewhere. He suggested that new oceanic crust continuously spread away from the ridges in a conveyor belt-like motion. Many millions of years later, the oceanic crust eventually descends into the oceanic trenches -- very deep, narrow canyons along the rim of the Pacific Ocean basin. According to Hess, the Atlantic Ocean was expanding while the Pacific Ocean was shrinking. As old oceanic crust was consumed in the trenches, new magma rose and erupted along the spreading ridges to form new crust. In effect, the ocean basins were perpetually being "recycled," with the creation of new crust and the destruction of old oceanic lithosphere occurring simultaneously. Thus, Hess' ideas neatly explained why the Earth does not get bigger with sea floor spreading, why there is so little sediment accumulation on the ocean floor, and why oceanic rocks are much younger than continental rocks.

Concentration of earthquakes

During the 20th century, improvements in seismic instrumentation and greater use of earthquake-recording instruments (seismographs) worldwide enabled scientists to learn that earthquakes tend to be concentrated in certain areas, most notably along the oceanic trenches and spreading ridges. By the late 1920s, seismologists were beginning to identify several prominent earthquake zones parallel to the trenches that typically were inclined 40-60° from the horizontal and extended several hundred kilometers into the Earth. These zones later became known as Wadati-Benioff zones, or simply Benioff zones, in honor of the seismologists who first recognized them, Kiyoo Wadati of Japan and Hugo Benioff of the United States. The study of global seismicity greatly advanced in the 1960s with the establishment of the Worldwide Standardized Seismograph Network (WWSSN) to monitor the compliance of the 1963 treaty banning above-ground testing of nuclear weapons. The much-improved data from the WWSSN instruments allowed seismologists to map precisely the zones of earthquake concentration worldwide.
Understanding Plate motion 

Scientists now have a fairly good understanding of how the plates move and how such movements relate to earthquake activity. Most movement occurs along narrow zones between plates where the results of plate-tectonic forces are most evident.

 There are four types of plate boundaries:
  • Divergent boundaries -- where new crust is generated as the plates pull away from each other.
  • Convergent boundaries -- where crust is destroyed as one plate dives under another.
  • Transform boundaries -- where crust is neither produced nor destroyed as the plates slide horizontally past each other.
  • Plate boundary zones -- broad belts in which boundaries are not well defined and the effects of plate interaction are unclear.
Divergent boundaries

Divergent boundaries occur along spreading centers where plates are moving apart and new crust is created by magma pushing up from the mantle. Picture two giant conveyor belts, facing each other but slowly moving in opposite directions as they transport newly formed oceanic crust away from the ridge crest.

Perhaps the best known of the divergent boundaries is the Mid-Atlantic Ridge. This submerged mountain range, which extends from the Arctic Ocean to beyond the southern tip of Africa, is but one segment of the global mid-ocean ridge system that encircles the Earth. The rate of spreading along the Mid-Atlantic Ridge averages about 2.5 centimeters per year (cm/yr), or 25 km in a million years. This rate may seem slow by human standards, but because this process has been going on for millions of years, it has resulted in plate movement of thousands of kilometers. Seafloor spreading over the past 100 to 200 million years has caused the Atlantic Ocean to grow from a tiny inlet of water between the continents of Europe, Africa, and the Americas into the vast ocean that exists today.

The volcanic country of Iceland, which straddles the Mid-Atlantic Ridge, offers scientists a natural laboratory for studying on land the processes also occurring along the submerged parts of a spreading ridge. Iceland is splitting along the spreading center between the North American and Eurasian Plates, as North America moves westward relative to Eurasia.


The consequences of plate movement are easy to see around Krafla Volcano, in the northeastern part of Iceland. Here, existing ground cracks have widened and new ones appear every few months. From 1975 to 1984, numerous episodes of rifting (surface cracking) took place along the Krafla fissure zone. Some of these rifting events were accompanied by volcanic activity; the ground would gradually rise 1-2 m before abruptly dropping, signaling an impending eruption. Between 1975 and 1984, the displacements caused by rifting totaled about 7 m.

In East Africa, spreading processes have already torn Saudi Arabia away from the rest of the African continent, forming the Red Sea. The actively splitting African Plate and the Arabian Plate meet in what geologists call a triple junction, where the Red Sea meets the Gulf of Aden. A new spreading center may be developing under Africa along the East African Rift Zone. When the continental crust stretches beyond its limits, tension cracks begin to appear on the Earth's surface. Magma rises and squeezes through the widening cracks, sometimes to erupt and form volcanoes. The rising magma, whether or not it erupts, puts more pressure on the crust to produce additional fractures and, ultimately, the rift zone.

East Africa may be the site of the Earth's next major ocean. Plate interactions in the region provide scientists an opportunity to study first hand how the Atlantic may have begun to form about 200 million years ago. Geologists believe that, if spreading continues, the three plates that meet at the edge of the present-day African continent will separate completely, allowing the Indian Ocean to flood the area and making the easternmost corner of Africa (the Horn of Africa) a large island.

Convergent boundaries

The size of the Earth has not changed significantly during the past 600 million years, and very likely not since shortly after its formation 4.6 billion years ago. The Earth's unchanging size implies that the crust must be destroyed at about the same rate as it is being created, as Harry Hess surmised. Such destruction (recycling) of crust takes place along convergent boundaries where plates are moving toward each other, and sometimes one plate sinks (is subducted) under another. The location where sinking of a plate occurs is called a subduction zone.

The type of convergence -- called by some a very slow "collision" -- that takes place between plates depends on the kind of lithosphere involved. Convergence can occur between an oceanic and a largely continental plate, or between two largely oceanic plates, or between two largely continental plates.
Oceanic-continental convergence

If by magic we could pull a plug and drain the Pacific Ocean, we would see a most amazing sight -- a number of long narrow, curving trenches thousands of kilometers long and 8 to 10 km deep cutting into the ocean floor. Trenches are the deepest parts of the ocean floor and are created by subduction.


Off the coast of South America along the Peru-Chile trench, the oceanic Nazca Plate is pushing into and being subducted under the continental part of the South American Plate. In turn, the overriding South American Plate is being lifted up, creating the towering Andes mountains, the backbone of the continent. Strong, destructive earthquakes and the rapid uplift of mountain ranges are common in this region. Even though the Nazca Plate as a whole is sinking smoothly and continuously into the trench, the deepest part of the subducting plate breaks into smaller pieces that become locked in place for long periods of time before suddenly moving to generate large earthquakes. Such earthquakes are often accompanied by uplift of the land by as much as a few meters.

On 9 June 1994, a magnitude-8.3 earthquake struck about 320 km northeast of La Paz, Bolivia, at a depth of 636 km. This earthquake, within the subduction zone between the Nazca Plate and the South American Plate, was one of deepest and largest subduction earthquakes recorded in South America. Fortunately, even though this powerful earthquake was felt as far away as Minnesota and Toronto, Canada, it caused no major damage because of its great depth.


Oceanic-continental convergence also sustains many of the Earth's active volcanoes, such as those in the Andes and the Cascade Range in the Pacific Northwest. The eruptive activity is clearly associated with subduction, but scientists vigorously debate the possible sources of magma: Is magma generated by the partial melting of the subducted oceanic slab, or the overlying continental lithosphere, or both?

Oceanic-oceanic convergence


As with oceanic-continental convergence, when two oceanic plates converge, one is usually subducted under the other, and in the process a trench is formed. The Marianas Trench (paralleling the Mariana Islands), for example, marks where the fast-moving Pacific Plate converges against the slower moving Philippine Plate. The Challenger Deep, at the southern end of the Marianas Trench, plunges deeper into the Earth's interior (nearly 11,000 m) than Mount Everest, the world's tallest mountain, rises above sea level (about 8,854 m).

Subduction processes in oceanic-oceanic plate convergence also result in the formation of volcanoes. Over millions of years, the erupted lava and volcanic debris pile up on the ocean floor until a submarine volcano rises above sea level to form an island volcano. Such volcanoes are typically strung out in chains called island arcs. As the name implies, volcanic island arcs, which closely parallel the trenches, are generally curved. The trenches are the key to understanding how island arcs such as the Marianas and the Aleutian Islands have formed and why they experience numerous strong earthquakes. Magmas that form island arcs are produced by the partial melting of the descending plate and/or the overlying oceanic lithosphere. The descending plate also provides a source of stress as the two plates interact, leading to frequent moderate to strong earthquakes.

Continental-continental convergence


The Himalayan mountain range dramatically demonstrates one of the most visible and spectacular consequences of plate tectonics. When two continents meet head-on, neither is subducted because the continental rocks are relatively light and, like two colliding icebergs, resist downward motion. Instead, the crust tends to buckle and be pushed upward or sideways. The collision of India into Asia 50 million years ago caused the Indian and Eurasian Plates to crumple up along the collision zone. After the collision, the slow continuous convergence of these two plates over millions of years pushed up the Himalayas and the Tibetan Plateau to their present heights. Most of this growth occurred during the past 10 million years. The Himalayas, towering as high as 8,854 m above sea level, form the highest continental mountains in the world. Moreover, the neighboring Tibetan Plateau, at an average elevation of about 4,600 m, is higher than all the peaks in the Alps except for Mont Blanc and Monte Rosa, and is well above the summits of most mountains in the United States.



Above: The collision between the Indian and Eurasian plates has pushed up the Himalayas and the Tibetan Plateau. Below: Cartoon cross sections showing the meeting of these two plates before and after their collision. The reference points (small squares) show the amount of uplift of an imaginary point in the Earth's crust during this mountain-building process.



Transform boundaries

The zone between two plates sliding horizontally past one another is called a transform-fault boundary, or simply a transform boundary. The concept of transform faults originated with Canadian geophysicist J. Tuzo Wilson, who proposed that these large faults or fracture zones connect two spreading centers (divergent plate boundaries) or, less commonly, trenches (convergent plate boundaries). Most transform faults are found on the ocean floor. They commonly offset the active spreading ridges, producing zig-zag plate margins, and are generally defined by shallow earthquakes. However, a few occur on land, for example the San Andreas fault zone in California. This transform fault connects the East Pacific Rise, a divergent boundary to the south, with the South Gorda -- Juan de Fuca -- Explorer Ridge, another divergent boundary to the north.


The San Andreas fault zone, which is about 1,300 km long and in places tens of kilometers wide, slices through two thirds of the length of California. Along it, the Pacific Plate has been grinding horizontally past the North American Plate for 10 million years, at an average rate of about 5 cm/yr. Land on the west side of the fault zone (on the Pacific Plate) is moving in a northwesterly direction relative to the land on the east side of the fault zone (on the North American Plate).

Oceanic fracture zones are ocean-floor valleys that horizontally offset spreading ridges; some of these zones are hundreds to thousands of kilometers long and as much as 8 km deep. Examples of these large scars include the Clarion, Molokai, and Pioneer fracture zones in the Northeast Pacific off the coast of California and Mexico. These zones are presently inactive, but the offsets of the patterns of magnetic striping provide evidence of their previous transform-fault activity.

Plate-boundary zones

Not all plate boundaries are as simple as the main types discussed above. In some regions, the boundaries are not well defined because the plate-movement deformation occurring there extends over a broad belt (called a plate-boundary zone). One of these zones marks the Mediterranean-Alpine region between the Eurasian and African Plates, within which several smaller fragments of plates (microplates) have been recognized. Because plate-boundary zones involve at least two large plates and one or more microplates caught up between them, they tend to have complicated geological structures and earthquake patterns.
Rates of motion

We can measure how fast tectonic plates are moving today, but how do scientists know what the rates of plate movement have been over geologic time? The oceans hold one of the key pieces to the puzzle. Because the ocean-floor magnetic striping records the flip-flops in the Earth's magnetic field, scientists, knowing the approximate duration of the reversal, can calculate the average rate of plate movement during a given time span. These average rates of plate separations can range widely. The Arctic Ridge has the slowest rate (less than 2.5 cm/yr), and the East Pacific Rise near Easter Island, in the South Pacific about 3,400 km west of Chile, has the fastest rate (more than 15 cm/yr).

Evidence of past rates of plate movement also can be obtained from geologic mapping studies. If a rock formation of known age -- with distinctive composition, structure, or fossils -- mapped on one side of a plate boundary can be matched with the same formation on the other side of the boundary, then measuring the distance that the formation has been offset can give an estimate of the average rate of plate motion. This simple but effective technique has been used to determine the rates of plate motion at divergent boundaries, for example the Mid-Atlantic Ridge, and transform boundaries, such as the San Andreas Fault.

Current plate movement can be tracked directly by means of ground-based or space-based geodetic measurements; geodesy is the science of the size and shape of the Earth. Ground-based measurements are taken with conventional but very precise ground-surveying techniques, using laser-electronic instruments. However, because plate motions are global in scale, they are best measured by satellite-based methods. The late 1970s witnessed the rapid growth of space geodesy, a term applied to space-based techniques for taking precise, repeated measurements of carefully chosen points on the Earth's surface separated by hundreds to thousands of kilometers. The three most commonly used space-geodetic techniques -- very long baseline interferometry (VLBI), satellite laser ranging (SLR), and the Global Positioning System (GPS) -- are based on technologies developed for military and aerospace research, notably radio astronomy and satellite tracking.

More Info : Click Here 

Brief Explanation : 

The geological process by which the Earth came to have its present interior structure is called differentiation

Within about 1 billion years of its formation the Earth was melted by heat arising from a combination of sources:

Gravitational energy left from the formation of the planet,


Meteor bombardment


Decay of radioactive material trapped in the body of the Earth.


While the Earth was molten, gravity acted to concentrate more dense material near the center and less dense material nearer the surface. When the Earth solidified again (except for the liquid outer core) it was left with a layered structure with more dense material like iron and nickel near the center and less dense rocks nearer the surface. As the outer layers cooled and solidified, large cracks developed because of thermal stress, leaving the lithosphere broken up into large blocks or plates.It is now agreed that the crustal plates of the Earth are in horizontal motion. This is called continental drift colloquially, and plate tectonics in technically more precise language.The crust is thin, varying from a few tens of kilometers thick beneath the continents to to less than 10 km thick beneath the many of the oceans. The crust and upper mantle together constitute the lithosphere, which is typically 50-100 km thick and is broken into large plates (not illustrated). These plates sit on the aesthenosphere.

The aesthenosphere is kept plastic (deformable) largely through heat generated by radioactive decay. The material that is decaying is primarily radioactive isotopes of light elements like aluminum and magnesium. This heat source is small on an absolute scale (the corresponding heat flow at the surface out of the Earth is only about 1/6000 of the Solar energy falling on the surface). Nevertheless, because of the insulating properties of the Earth's rocks this is sufficient to keep the aesthenosphere plastic in consistency.

The original conjectures concerning plate tectonics were based on circumstantial evidence like the shapes of continents being such that they would fit well if pushed together. Today, we have a much broader set of evidence in favor of the hypothesis.

Indications of Tectonic Activity

Among the classes of evidence for continental drift and the underlying plate tectonics we may list
  • The shapes of many continents are such that they look like they are separated pieces of a jig-saw puzzle. For example, look in the adjacent map at the shape of the east coast of North and South Americal relative to the shape of the west coast of Africa and Europe.
  • Many fossil comparisons along the edges of continents that look like they fit together suggest species similarities that would only make sense if the two continents were joined at some point in the past.
  • There is a large amount of seismic, volcanic, and geothermal activity along the conjectured plate boundaries. This is shown clearly below in the figure labeled "Crustal plate boundaries" where the epicenters of earthquakes above Richter magnitude 5.0 are plotted for a 10-year period. The concentration is striking, and indeed this plot serves to define the plate boundaries extremely well.
  • There are ridges, such as the Mid-Atlantic Ridge (see figures above and below) where plates are separating that are produced by lava welling up from between the plates as they pull apart. Likewise, there are mountain ranges being formed where plates are pushing against each other (e.g., the Himalayas, which are still growing).
Age of the Sea Floor

If the crustal plates are pulling apart at boundaries like the Mid-Atlantic Ridge the sea floor near these ridges should be very young geologically, since it is formed of material upwelling from the interior.

Past and future consequences of plate tectonics for the Earth's surface are enormous.


Some Past and Present Consequences

Plate tectonics has been responsible for many of the features that we find on the surface of the Earth today.
  • A few examples include The Appalachian Mountains were formed from wrinkling of the Earth's surface produced by the collision of the North American and African plates.
  • The seismic and volcanic activity of the West Coast of the United States (for example, the San Andreas Fault) is produced by the grinding of the Pacific and North American Plates against each other. Indeed, the entire "ring of fire" around the Pacific, corresponding to regions of high volcanic and seismic activity, is caused primarly by the motion of the Pacific Plate.
  • The Dead Sea in Israel is part of a rift system produced by plates that are pulling apart in that region.
  • The Himalayan Mountains were formed (indeed are still growing) as a result of the Indian subplate burrowing under the Eurasian plate and raising its edge.
Some Future Consequences of Plate Tectonics

Plate tectonics is still an active process, and will drastically reshape the face of the Earth over the next 50 million years or so. A few consequences of plate tectonics based on projections of present motion include:
  • Portions of California will separate from the rest of North America.
  • The Italian "boot" will disappear.
  • Australia will become linked to Asia.
  • Africa will separate from the Near East. 
As a consequence of plate tectonics (supplemented by wind and water erosion), we live on the surface of a geologically active planet that has obliterated most of its early geological history.

Source : USGS